Sensors and incubators
Ethoscopes record behaviour; the devices in this section record, and in one case control, the conditions the flies live in. The node finds them on the network and attaches their readings to every experiment run in the same incubator, matched by the location you give each device.
A small Wi-Fi device, built from an ESP8266 board with a BME280 and a BH1750 sensor, that measures temperature, humidity, pressure and light. The parts are inexpensive and it lives in a printed case inside the incubator. The node discovers it automatically and adds its readings to the results of every experiment in the same incubator.
A software sensor that runs as a service on the node and needs no hardware. It serves either live weather for a place you choose, from OpenWeatherMap, or random test values, and the node records it exactly like a physical sensor. Use it to log outdoor weather alongside your experiments, or to have a sensor for tests and demonstrations.
A Peltier-based incubator controlled over Wi-Fi by the node. Each unit regulates its own temperature, runs a light schedule set on the node, reports humidity and light, and also acts as a sensor, so the node logs its readings with the experiments. Support for it is in the development (dev) branch of the ethoscope software and not yet in a release.